TC-15/TG-15 Fiber Identifier Set
I. INTRODUCTION
With rapid development of optical fiber networking, the patch cord and pigtail at the ODF in most of the center office become more and more complex and disordered. TUCSON-OPTIC released this new Live Optical Fiber Identification Test Set that is combined by the normal optical fiber Identifier (TC-15) and the tone generator (TG-15). It enables technicians identify the specific fiber without disconnecting it. It will realize good and effective management for the live fiber checking at ODF in the center office
II. MAIN FEATURES
-- Consist of TC-15 Optical Fiber Identifier and TG-15 Tone Generator
-- Non-instrusive power measurement and fiber identification
-- 1Hz frequency signal sending out and identification will not affect the signal transited in the network.
-- Advanced online low frequency signal generation technology which makes user quickly checked out the specific fiber online.
-- Support the fiber of 900um, 2mm and 3mm.
-- Insertion loss <1dB that will not affect the signal transmitted in the network
-- Auto identification function
-- LED displaying
-- AAA battery for power supply that makes the battery easy to replace
III. LAYOUT
IV. SPECIFICATIONS
TG-15 Tone Generator | ||
Fiber to Measure | 3mm, 2mm, 900um | |
Wavelength Range | 1300nm~1650nm | |
Loss | <2dB | |
Output Power Detect Range | -35dBm~+25dBm | |
Power Supply | 1.5V AAA (4PCS) | |
Operation Time | 15 hours | |
Operating Temperature | -10℃ ~ +60℃ | |
Storage Temperature | -25℃ ~ +70℃ | |
Auto Off Time | 5 minutes | |
Weight | 700g (Including 4PCS AAA Batteries) | |
Dimension | 200mm*30mm*35mm | |
TC-15 Optical Fiber Identifier | ||
Identified Wavelength Range | 800nm~1700nm | |
Identified Signal Type | CW, 270Hz±5%,1kHz±5%,2kHz±5% | |
Detector Type | Ø1mm InGaAs 2pcs | |
Adapter Type | Ø0.25 (Applicable for Bare Fiber) Ø0.9 (Applicable for Ø0.9 Cable) Ø2.0 (Applicable for Ø2.0 Cable) Ø3.0 (Applicable for Ø3.0 Cable) | |
Signal Direction | Left & Right LED | |
Singe Direction Test Range (dBm, CW/0.9mm bare fiber) | -46~10(1310nm) | |
-50~10(1550nm) | ||
Signal Power Test Range (dBm, CW/0.9mm bare fiber) | -50~+10 | |
Signal Frequency Display (Hz) | 270, 1K, 2K | |
Frequency Test Range (dBm, Average Value) | Ø0.9, Ø2.0, Ø3.0 | -30~0 (270Hz, 1KHz) |
-25~0 (2KHz) | ||
Ø0.25 | -25~0 (1KHz, 2KHz) | |
-20~0 (2KHz) | ||
Insertion Loss (dB, Typical Value) | 0.8 (1310nm) | |
2.5 (1550nm) | ||
Alkaline Battery (V) | 2pcs AA batteries | |
Operating Temperature (℃) | -10~+60 | |
Storage Temperature (℃) | -25~+70 | |
Dimension (mm) | 196*30.5*27 | |
Weight (g) | 195 |