TC-82 PON Power Meter

I. INTRODUCTION

In the PON network, by extracting a small part of the optical signal online, the TC-82 PON Power Meter can be carried out in the whole FTTx service opening, maintenance and detection stage, which can reliably verify and ensure to meet the requirements of network communication. It can test the optical power value of voice data and video signals at the same time, and give the warning of exceeding the threshold. It is an ideal choice for engineering, construction and maintenance.

II. FEATURES

-- Hand-held, easy to operate

-- Automatically shut down can be set

-- Burst mode test for 1310nm upstream wavelength

-- Measurement and alarm thresholds can set

-- Support the synchronous measurement and display of experimental voice, data and video signals on PON architecture

-- Upstream signal 1310nm, downstream signal 1490nm and 1550nm in PON system can be measured at once

III. LAYOUT

1. ONT: upstream signal 1310nm detection port

2. OLT/VIDEO: downstream signal 1490/1 550nm detection port

3. USB: mobile power supply available, non charging

4. Display Screen

5. ON/OFF&Auto shutdown key

7. THR: set the threshold

6. REF: set reference power

8. ▼/LOAD: save or view the saved results

9. ▲/UNIT: switch display unit dBm/dB/mW

10. SEL: in threshold set mode, switch the lower limit of threshold

and the lower limit of alarm in threshold group; in the view interface, switch to saved items.

IV. SPECIFICATIONS

V. PACKAGING

PON POWER METER	BAG	BATTERY	USER MANUAL	CARTON BOX

VI. ORDERING INFORMATION